Shanghai GOVO Telecom Co., Ltd.

Tel.: +86-21-60712325-807

Shanghai GOVO Telecom Co., Ltd.
Tel.: +86-21-60712325-807

Home » Products » Fibre Optic Cable » GYTA Non-Armored Stranded Loose Tube Cable

GYTA Non-Armored Stranded Loose Tube Cable

Structure
For the GYTA non-armored stranded loose tube cable, some 250μm bare fibers, which are a combination of fiber core, cladding and coating, are set inside one high modulus loose tube, and several tubes and filler rods are stranded around a metallic central strength member, forming a round cable core. Then, this cable core is wrapped by APL (aluminum polyethylene laminate) along its length, and water blocking material is filled inside APL. Finally, extruded PE sheath is applied, and a loose tube fiber optic cable is manufactured. But, for some loose tube cables, water blocking material is filled inside loose tubes, and the central strength member is covered by a PE layer.

Structural Diagram

Fiber
Tube filling compound
Loose tube
Cable filling compound
APL
PE sheath
Central strength member

Fiber
Tube filling compound
Loose tube
Cable filling compound
APL
PE sheath
Central strength member

Characteristic
1. This stranded optical fiber cable precisely controls its excess fiber length to provide excellent tensile strength and wide temperature range, whilst the PE sheath makes our product flexible and resistant to high crush force and UV radiation.

2. For this stranded loose tube cable, its loose tube is made from high-quality material which boasts high mechanical strength and good hydrolysis resistance, and a special kind of gel is filled inside the tube to protect optical fibers. Moreover, the specifically designed cable structure effectively prevents the buffer tube from elongation and retraction when temperature changes.

3. These single mode and multimode fiber optic cables have unrivalled water resistance, and this is resulted from their structure as illustrated below.
a. Single steel wire as the central strength member
b. Special water blocking material inside and between loose tubes

Optical Parameters of Non-Armored Stranded Loose Tube Cable

Attenuation G652 ≤0.36dB/km@1310nm ≤0.22dB/km@1550nm
G655 ≤0.40dB/km@1310nm ≤0.23dB/km@1550nm
50/125 ≤3.0dB/km@850nm ≤1.0dB/km@1300nm
62.5/125 ≤3.0dB/km@850nm ≤1.0dB/km@1300nm
Bandwidth 50/125 ≥500MHz·km@850nm ≥1000MHz·km@1300nm
62.5/125 ≥200MHz·km@850nm ≥600MHz·km@1300nm

Structural Parameters of Non-Armored Stranded Loose Tube Cable

Model (fiber count increment: 2) Fiber count Tube No. Filler rod No. Cable diameter (mm) Cable weight (kg/km) Tensile strength (long/ short term, N) Crush resistance (long/ short term, N/100mm) Bending radius (static/ dynamic, mm)
GYTA-2~6Xn 2~6 1 4 9.2 80 600/1500 300/1000 10D/20D
GYTA-8~12Xn 8~12 2 3 9.2 80 600/1500 300/1000 10D/20D
GYTA-14~18Xn 14~18 3 2 92 80 600/1500 300/1000 10D/20D
GYTA-20~24Xn 20~24 4 1 9.2 80 600/1500 300/1000 10D/20D
GYTA-26~30Xn 26~30 5 0 9.2 80 600/1500 300/1000 10D/20D
GYTA-32~36Xn 32~36 6 0 9.7 97 1000/3000 300/1000 10D/20D
GYTA-38~48Xn 38~48 4 1 10.5 109 1000/3000 300/1000 10D/20D
GYTA-50~60Xn 50~60 5 0 10.5 109 1000/3000 300/1000 10D/20D
GYTA-62~72Xn 62~72 6 0 11.5 126 1000/3000 300/1000 10D/20D
GYTA-74~84Xn 74~84 7 1 13.2 153 1000/3000 300/1000 10D/20D
GYTA-86~96Xn 86~96 8 0 13.2 153 1000/3000 300/1000 10D/20D
GYTA-98~108Xn 98~108 9 1 14.6 182 1000/3000 300/1000 10D/20D
GYTA-110~120Xn 110~120 10 0 14.6 182 1000/3000 300/1000 10D/20D
GYTA-122~1132Xn 122~132 11 1 16.5 221 1000/3000 300/1000 10D/20D
GYTA-134~144Xn 134~144 12 0 16.5 221 1000/3000 300/1000 10D/20D

Standard
Our loose tube cable is compliant with YD/T 901-2001 and IEC 60794-1 standards.

Storage and Operating Temperature
This non-armored fiber optic cable shall be stored and used within the temperature range of -40℃~+70℃.

Application
Our stranded loose tube cable suits for core network, access network, metropolitan area network and other network systems where duct, aerial, underwater or direct buried installation is required.

Related products
Inquiry Form