Shanghai GOVO Telecom Co., Ltd.

Tel.: +86-21-60712325-807

Shanghai GOVO Telecom Co., Ltd.
Tel.: +86-21-60712325-807

Home » Products » Fibre Optic Fusion Splicer » Fujikura 70R Ribbon Fusion Splicer

Fujikura 70R Ribbon Fusion Splicer

Many high fiber count cables are made from ribbons of fibers, usually 12 fibers per ribbon. So, splitting all these fibers out to splice individually is a difficult and time consuming job. Given this, the Fujikura 70R ribbon fusion splicer is developed to splice a ribbon of fibers at one time.

Feature
1. This mass fusion splicer is able to complete splicing process in 11 seconds at SM-FAST mode, and it only takes 18 seconds to heat the FP-04 (T) heat shrinkable tube.
2. If the Li-ion battery is fully charged, it can finish 110 times of splicing and heating cycles, and the electrode gives over 1500 times of electric arc cycle.
3. Thanks to the automatic wind protector and tube heater, our ribbon splicer reduces required operational steps, and it also realizes convenient working as a result of the carrying case which has an integrated workstation.
4. The ribbon fusion splicer could deliver satisfying performance even under extreme conditions because it is resistant to dust, rain and shock. In addition, the observation system doesn't require retroreflectors.

Technical Data of Fujikura 70R Ribbon Fusion Splicer

Alignment method Cladding alignment
Applicable fiber SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657)
Cladding diameter 125μm
Cleave length 10~13mm
Splicing/heating mode 100 splicing modes and 30 heating modes
Splice loss 0.05dB(SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)
Splicing/heating time 11 seconds for splicing standard SM fiber at SM-FAST mode, 18 seconds for heating standard FP-04 (T) heat shrinkable tube
Splicing result storage Last 2000 records
Viewing method/magnification 2 axis CMOS camera with 4.73" color LCD
35-90X for X/Y
Tension test 1.96~2.25N
Heat shrinkable tube 60mm, 40mm and Fujikura micro tube
No. of splicing and heating per battery (fully charged) 110 cycles with BTR-09 (4000mAH) Li-ion battery
Electrode life 1500 splices
Size/weight 146W×159D×150H (mm), 2.5kg (including battery)
Operation condition Altitude: 0-3660m above sea level
Wind: 15m/s
Temperature: -10℃~+50℃
Humidity: 0-95%RH
Shock/dust/rain resistance Shock: 76cm all surface drop
Rain: H=10mm/hr for 10 minutes, IP2X
Dust: Exposed to dust (0.1-500μm alumina silicate), IP5X

Standard Package

Name Model Qty.
Ribbon fusion splicer 70R 1pc
High precision fiber cleaver CT-30 1pc
Battery BTR-09 1pc
Battery charge cord DCC-18 1pc
AC adapter ADC-18 1pc
AC power cord ACC-17 1pc
Fiber holder FH-50-XX 2 pairs
Thermal jacket stripper HJS-02 1pc
Screw driver SD-01 1pc
Alcohol pot AP-01 1pc
Carrying case CC-30 1pc
Spare electrodes ELCT2-20A 1pc
Instruction manual and software (CD) M-70 1pc
USB cable USB-01 1pc
Sleeve loader SL-01 1pc
Warning and cautions W-70-E 1pc
Quick reference guide Q-70R 1pc
Related products
Inquiry Form