Shanghai GOVO Telecom Co., Ltd.

Tel.: +86-21-60712325-807

Shanghai GOVO Telecom Co., Ltd.
Tel.: +86-21-60712325-807

Home » Products »
    1. GYTA Non-Armored Stranded Loose Tube CableThis stranded optical fiber cable precisely controls its excess fiber length to provide excellent tensile strength and wide temperature range, whilst the PE sheath makes our product flexible and resistant to high crush force and UV radiation.
    1. GYTS Light-Armored Stranded Loose Tube Cable

      The GYTS light-armored stranded loose tube cable is an optical communication cable.

      More >> Single steel wire as the central strength member
      Special water blocking compound inside and between loose tubes
      Damp proof PSP outside the cable core
    1. GYTA53 Armored Stranded Loose Tube Cable As mentioned above, the gel-filled loose tube offers critical protections for optic fibers, and the tube itself is constructed by a kind of special material which has good hydrolysis resistance and pretty high strength.
    1. GYXTW Armored Unitube CableThe PSP layer outside the loose tube greatly improves moisture proofing property of this unitube optical cable, and two parallel steel wires contribute to high tensile strength.
    1. All Dielectric Self-Supporting (ADSS) CableOur self-supporting aerial cable is designed to be lightweight and small in diameter to reduce load on support towers and similar structures due to cable weight, wind and ice, and its maximum span length is over 1000m.
    1. GYTC8A Figure 8 Self-Supporting CableOur figure 8 outdoor aerial cable boasts extremely high tensile strength owing to the implementation of steel wires, so it suits for self-supporting aerial installation which could cut down the installation cost.
    1. Multi-Purpose Distribution Cable (MPC)In the column of "Model", X1, X2 and Xn represent cable purpose, sheath color and fiber type, respectively. These items are available in different choices, please refer to the "Ordering Information" below.
    1. Mobile Cable (MOC)As a result of the all-dielectric structure, our telecommunication cable is protected against EMI, and its outer sheath is resistant to abrasion, ageing, oil, fire, etc. In addition, the PUR sheath could be removed easily.
    1. Optical Fibre Drop CableFor the GJXH flat drop cable, it adopts metallic strength members, so it has higher crush resistance. On the other hand, the GJXFH flat drop cable has an all-dielectric structure, so shielding box is not required.
    1. Fibre Optic Patch Cord

      The connectors are available in different types including FC, ST, SC, LC, MU, MPO, E2000, MTRJ and so on, while for the cable ...

      More >> Our optical cable assembly exhibits unsurpassed durability, and it can withstand more than 1000 mating cycles (1 cycle = mate and unmate).
      The fiber optic connector has a low insertion loss which is only about 0.15dB for single mode jumpers.
    1. Waterproof Fibre Optic PigtailThese single-core and multi-core pigtails allow reliable and convenient splicing, and they are suitable for harsh outdoor environment.
      For our fibre optic pigtail, its cable length, core number and connector type (FC, SC, ST, LC, MU, SMA, etc.) could be made-to-order to meet different requirements.
    1. Fibre Optic AdapterA fiber optic adapter, also known as fiber optic coupler, provides precise alignment of optical fiber in fiber optic communication. Different fiber optic connectors could be inserted into its two ends to realize conversion among FC, SC, ST, LC, MTRJ, MPO, E2000 and other connectors.
    1. Fibre Optic Fast ConnectorOur quick termination connector allows fast and easy operation, and only one cable jacket stripping process is needed.
      The fiber optic fast connector doesn't have any special requirements for its working environment, and it can finish cable connection job in a short time and without power supply.
    1. Fibre Optic CleanerOur fiber connector cleaner is constructed from antistatic resin, and it could clean over 800 end faces per unit. Moreover, only a simple push motion is required to engage tool, and users will hear a "click" sound when cleaning job is completed.
    1. Fujikura 70S Fusion SplicerThe Fujikura 70S fusion splicer is a high-speed, low-loss, single fiber fusion splicer. It has the world's quickest splicing time (7 seconds under SM-FAST mode) and tube-heating time (14 seconds).
      Our fiber optic cable splicing machine is outfitted with automatic wind protector and tube heater to simplify splicing operation, and it doesn't need retroreflector.
    1. Fujikura 70R Ribbon Fusion SplicerIf the Li-ion battery is fully charged, it can finish 110 times of splicing and heating cycles, and the electrode gives over 1500 times of electric arc cycle.
      If the Li-ion battery is fully charged, it can finish 110 times of splicing and heating cycles, and the electrode gives over 1500 times of electric arc cycle.
    1. AV6471 Fusion Splicer

      Owing to the real-time electric discharge calibration system, it is not necessary to adjust processing parameters under most conditions.

      More >> A large-capacity Li-ion battery is built-in to finish 220 times of splicing and heating cycles, thus making this high-speed fiber optic splicer particularly suitable for outside plant applications.
      The electrodes of our fusion splicer are capable of supplying more than 4000 times of electric arc.
    1. Fujikura CT-30 Series High Precision Optical Fiber CleaverWith a typical cleaving angle of 0.5 degree, our product provides optic fibers with flat ends, and it has a large or small scrap collector to store fiber shards, thus realizing convenient use. In this way, working efficiency is improved to a large extent.
    1. Sumitomo FC-6S High Precision Optical Fiber CleaverAs the name implies, the FC-6S high precision optical fiber cleaver is manufactured by Sumitomo, and it is a single fiber cleaver. This fiber cleaving tool is applicable for both 250μm and 900μm coated fibers, and it offers precise cleaving results without requiring special skills.
    1. GV-7S High Precision Optical Fiber Cleaver

      The GV-7S high precision optical fiber cleaver is is often used to cut drop cables for FTTH applications.

      More >> Our product finishes cleaving in two steps to provide flat fiber ends, and the operation is quite simple and convenient. So, working efficiency is greatly enhanced.
    1. GW-24 Fiber Optic Tool Kit
      Part No. Description QTY
      1 Precision screwdriver kit 1PC
      2 CLAUS-Fiber Optic Stripper 1PC
      3 MILLER- Fiber Optic Stripper 1PC
    1. Comway C10 Fusion SplicerThe Comway C10 fusion splicer is a high performance single fiber fusion splicer.
      Large-capacity battery supports more than 300 times of continuous splicing and heating.
    1. GW 750 Single Fiber Fusion SplicerSystem test ensures the best working condition
      The fusion splicer can automatically check fiber end face and calibrate parameters;
    1. GW4000 Optical Time Domain Reflectometer

      The GW4000 optical time domain reflectometer is a portable OTDR designed for FTTx applications.

      More >> The GW4000 optical time domain reflectometer is a portable OTDR designed for FTTx applications. It is mainly utilized to measure fiber length, overall attenuation, splice loss, mated-connector loss as well as other physical parameters, and it can also locate events and faults.
    1. JDSU MTS-2000 Optical Time Domain ReflectometerThis field optical reflectometer allows field installation of many OTDR modules including Quad and PON, and it automatically finishes fiber inspection, IL/ORL test, CWDM analysis, PON power metering and IEC pass/fail analysis.
    1. JDSU MTS-4000 Optical Time Domain Reflectometer

      Troubleshooting for networks based on fiber optic cables and copper cables.
      Installation and test of PON network ...

      More >> With two module slots, a 7-inch color screen and a 6600mAh Li-ion battery, this handheld OTDR is a truly cost-effective fiber optic network tester, and it has different communication interfaces (USB, 1Gbps Ethernet, Bluetooth, WiFi) to facilitate data transfer. In addition, a touch screen could be provided as request.
    1. AV6416 Optical Time Domain ReflectometerWith the Windows CE operating system and Chinese/English operation interface, this palm OTDR offers extra convenience during operation, and its anti-reflective LCD makes it easier for operators to check data even in field environment.
    1. AQ7275 Optical Time Domain ReflectometerWith an event dead zone of 0.8m which is probably the shortest in the world, our optical reflectometer is able to distinguish events even when they are closely spaced, and it supports up to four wavelengths choosing from 850, 1300, 1310, 1490, 1550, 1625 and 1650nm.
    1. GW550 Optical Time Domain ReflectometerThe GW550 optical time domain reflectometer is a dexterous, stable, durable optimized OTDR for broadcast and TV network, engineering installation of telecommunication network and maintenance testing.
    1. GW3200 Optical Power Meter

      A conventional LCD screen is provided in standard configuration, but an optional backlit LCD is also available to facilitate work at night.

      More >> This handheld optical power meter allows users to calibrate wavelengths, and the power measurement result is revealed in both mW and dBm.
      A conventional LCD screen is provided in standard configuration, but an optional backlit LCD is also available to facilitate work at night.
    1. GW3201 PON Optical Power MeterOur PON power meter monitors and reveals remaining battery capacity, and it can store up to 10 measurement results for convenient data check.
      There are several powering ways, and auto recharging is also achieved.
    1. GW3211 High Precision Optical Power MeterThe optical multimeter is powered by a built-in LiPo battery to enable it to work continuously for 140 hours, and it allows user-defined calibration.
      Our handheld optical power meter could be connected to PC via RS232 interface for data review, and the backlit could be switched on or off according to actual condition.
    1. GW3100 Optical Laser Light SourceOperators just need to press one button to change the wavelength of output laser, and a large LCD screen is used to display detailed working status.
      Our handheld laser source monitors remaining battery capacity, and there is an optional function that would shut off this device automatically after 10 minutes of idle time.
    1. GW101 Pen Shape Optical Visual Fault LocatorThe GW101 pen shape optical visual fault locator is very easy to carry owing to its pen style design, and it contains two models with different power outputs. This fiber tracer uses two AA batteries to support over 50 hours of continuous working, and it has a low battery indicator to tell people when to change battery.
    1. GW3103 Pen Shape Optical Visual Fault LocatorWith a 2.5mm universal connector interface, our visible fiber optic fault locator realizes quick connection with SC, ST and FC connectors, and it is also outfitted with a FC adapter to make the inspection more stable and reliable.
    1. GW3103-10S Optical Visual Fault Locator

      It is particularly popular on the market as a result of its superior technical performance.

      More >> With an output power of over 10mW, our visual fault finder is able to locate break points in a short time, and it will be shut down automatically after about 10 minutes of idle time to save power though the battery is sufficient for 12 hours of continuous working.
    1. GW3205 Fiber Optic MultimeterThis optical loss test set offers stable laser output at different wavelengths to fit for SMF and MMF, and it works under CW or modulation mode.
      Our fiber optic multimeter is powered by a rechargeable Li-ion battery to reduce user's operation cost, and it is compatible with LC, FC, SC, ST and other common connectors.
    1. GW3306 Optical Fiber IdentifierThe optical fiber identifier has a streamlined body, so it can be held on hand during work.
      Our live fiber identifier could inspect 250μm coated fiber, 900μm tight buffered fiber and 2.5mm patch cord directly, and it also detects modulated test tones (270Hz, 1kHz and 2kHz) to find a specific fiber quickly.
    1. JDSU FI-60 Optical Fiber IdentifierThanks to the ergonomic design, our fiber identifier realizes easy cable access under different environments, and the integrated ambient light shield not only enhances test reliability, but also avoids false reading.
    1. PLC Splitter

      A PLC splitter, or planer lightwave circuit splitter, is one of the most important passive devices in optical fiber links. It has multi input and ...

      More >> Our PLC coupler shows low insertion loss, low polarization dependent loss and good directivity (55dB), and it makes use of Korean chip to realize high uniformity.
      The PLC splitter is resistant to mechanical impact, and it could work under harsh environment. In addition, it can be outfitted with FC, SC or LC connectors as per customer.
    1. FBT SplitterWith a small size, our FBT coupler is available with various split ratios (1×2, 1×3, etc.), and its polarization dependent loss (PDL) is very low.
      This fiber optic splitter boasts high stability and good insulation between different wavelengths, and it is pretty cheap, especially for ones with two outputs.